Please read the guides below to ensure correct usage of all BEBYLUX products. If unsure with any of the points mentioned below, please contact our live support team or email us for further guidance before operating any BEBYLUX product. Not following your instructions manual and the guides outlined below can cause damage to your BEBYLUX product.

THE ONÊ by BEBYLUX

To ensure correct usage of the product, please ensure and follow the guides below: 

- Operating the Canopy / Hood

The Canopy / Hood must be operated independently to the carry handle. The structure of the Canopy / Hood is to protect your child against wind, sunlight and rain. No pressure or force must be exerted on the Canopy / Hood at any time. The Canopy / Hood should be raised and lowered gently with due care whilst the carry handle is folded back / down. Bending the Canopy / Hood under the carry handle or pushing the carry handle past the Canopy / Hood can cause damage - users are strictly advised to refrain from doing this. 

- Operating the Carry Handle

The Carry Handle must only be raised / lowered whilst the Canopy / Hood is raised first. This ensures that the Carry Handle and the Canopy / Hood are operated independently. Forcing the Carry Handle over the Canopy / Hood can cause damage to the Canopy / Hood, users are strictly advised to refrain from doing this. 

- Fitting / Unfitting the Car Seat from the Pram 

To correctly fit / unfit the car seat onto your pram / stroller we advise you follow the steps below:

1) Please ensure that your pram / stroller adapters have been fitted onto your pram / stroller in the correct order. L meaning Left onto the Left side of the pram / stroller and R meaning Right onto the right side of the pram / stroller. When you have fitted your adapters onto your pram / stroller you should be able to hear a "click" sound (this may vary between different branded pram / stroller adapters). Please ensure that your adapters have been correctly fitted and secured onto your pram / stroller.

2) Ensure that the Canopy / Hood on your car seat is raised and that the carry handle is also raised. Now lift your car seat over the position of the adapters, with the seating part of the car seat ( ie. where your baby is seated) facing you. Simultaneously lower the car seat onto the adapters, ensuring that both the Left and Right side adapters enter the allocated adapter slots of your car seat at the same time. Ensure that the car seat has been securely fitted onto the adapters all the way in

3) Follow this with lowering the carry handle backwards (away from you) until you hear a "click" sound. Your car seat has now been locked onto the car seat adapters. 

4) To unlock the car seat from the pram / stroller - first ensure your canopy / hood is raised follow this with raising the car seat carry handle fully. You will hear a "click" sound - the car seat has now been unlocked and is ready to be removed from the pram / stroller. 

5) Using the carry handle simply lift off the car seat in an equal upwards motion from the pram / stroller simultaneously from both the Left and Right side adapters at the same time. Pulling / lifting the car seat handle from side to side whilst the car seat is fitted onto the pram / stroller car seat adapters can cause damage to the joint between the carry handle and the car seat - users are strictly advised to refrain from doing this. 

ALEXA 123 

To ensure correct usage of the product, please ensure and follow the guides below: 

- Fitting the car seat into the isofix points : Before extending the isofix arms always ensure to rotate / tilt the isofix arms release lever anti-clockwise ( to the left ). Users are strictly advised to refrain from extending / retracting the isofix arms without operating the isofix arms release lever  first. Doing so will cause damage to the isofix mechanism. 

- Releasing the car seat from the isofix points : Due to the amount of tension securing the isofix teeth to the isofix points in the car, users are advised to push back the car seat into the back rest to release the tension, this will allow the user to operate the isofix arms release lever and pull the car seat away from the backrest. Gently pull the car seat from the backrest simultaneously from both left and the right side as far as the isofix arms allow to be extended. Now release the isofix teeth from the car isofix anchor points by pressing the isofix release button.  

ADVANCE 23

To ensure correct usage of the product, please ensure and follow the guides below: 

- Fitting the car seat into the isofix points : Before extending the isofix arms always ensure to rotate / tilt the isofix arms release lever anti-clockwise ( to the left ). Users are strictly advised to refrain from extending / retracting the isofix arms without operating the isofix arms release lever  first. Doing so will cause damage to the isofix mechanism. 

- Releasing the car seat from the isofix points : Due to the amount of tension securing the isofix teeth to the isofix points in the car, users are advised to push back the car seat into the back rest to release the tension, this will allow the user to operate the isofix arms release lever and pull the car seat away from the backrest. Gently pull the car seat from the backrest simultaneously from both left and the right side as far as the isofix arms allow to be extended. Now release the isofix teeth from the car isofix anchor points by pressing the isofix release button.